What is MaxFuse2b?

Posted by: Keith Ford | Posted on: March 4th, 2013 | 0 Comments

Polyolefin Fused Bonded Chain Link From Southwestern Wire Inc

MaxFuse2b is a commercially produced fused bonded color coated chain link fence for the residential, commercial and industrial chain link fence industry.  Galvanized steel core wire is coated with polyolefin elastomer to create this color coated chain link fence.  The most popular color is black with the most commonly used material being 9g core product with a two inch mesh.  When searching for a color coated option for your next project choose MaxFuse2b.  Here is more on information on fused bonded chain link fence.

2011 03 11 Fused Bonded 2b 008-2Not All Polymer Coatings Like PVC Are The Same

 

The coating formulation used by Southwestern Wire for the polyolefin elastomer MaxFuse2b is always 100% virgin prodcuct, no fillers. This formulation is also designed to handle any out gassing from the zinc coating as a result of heating the wire during the coating process eliminating any adhesion problems. Polyolefin MaxFuse2b is more flexible, more chip resistant, offers outstanding adhesion, greater UV stability, greater abrasion resistance and is not permeable to moisture.  Maxfuse2b chain link is not only a decorative coating but more importantly a protective coating.  MaxFuse2b doesn’t require an overly thick extruded coating and as such provides greater “see thru” visibility for security applications, plus an added benefit of less wind resistance.

 

Most Corrosive Resistant Chain Link Fence In The Fence Industry

MaxFuse2b polyolefin chain link from Southwestern Wire is the most corrosive resistant chain link fence in the fence industry.  Pleasing color, outstanding adhesion plus exceptional corrosion protection;hands down.  Maxfuse2b provides the best value for any application. Polyolefin color coated chain link fabric shall comply with ASTM F668 Class 2b thermally fused having a galvanized steel core wire. Coated wire shall be designated by the core wire gauge.  The polyolefin fused bonded coating shall be thermally fused to the galvanized core wire to a minimum thickness of .006 in.  The adhesion of the coating to the wire will be equal to or greater than that required by the adhesion test for ASTM F668 Class 2b.  The polyolefin coating shall withstand 1000 hour accelerated aging and mandrel bend test.

For more on Southwestern Wire’s MaxFused2b Chain Link

To connect with the specification sheet on ASTM F668 2b Southwestern Wire’s MaxFused2b

FT14_jpg-logo

Comments are closed.

© Copyright 2013 Southwestern Wire, Inc. All Rights Reserved.